![]() ![]() Engine does not have to be started for this demonstration. Set all relevant controls including fan, temperature, air direction / source and heated screen to clear windscreen and windows. #UK DRIVING TEST TELL ME QUESTIONS AND ANSWERS WINDOWS#Show me how you would set the demister controls to clear all the windows effectively, this should include both front and rear screens.Ī. Operate control to wash and wipe windscreen (turn ignition on if necessary). Show me how you would clean the windscreen using the windscreen washer and wipers.Ī. The tread depth should be at least 1.6mm across the central 3/4 of the breadth of the tyre and around the entire outer circumference. Tell me how you would check the tyres to show that they have sufficient tread depth and that their general condition is safe to use on the road.Ī. The head restraint should be adjusted so the rigid part of the head restraint is at least as high as the eye or top of the ears, and as close to the back of the head as is comfortable. Tell me how you make sure your head restraint is correctly adjusted so it provides the best protection in the event of a crash.Ī. When it is fully applied it should secure itself and shouldn't be at the end of it's working travel. ![]() Show me how you would check the parking brake for excessive wear.Ī. Don't forget the spare tyre and remember to refit the valve caps. Check the tyre pressures by using a reliable pressure gauge. Information will be found using the car manufacturer's manual. Tell me where you would find the information for the recommended tyre pressures for this car and how tyre pressures should be checked.Ī. Activate the indicators or hazard warning lights and walk around the car to see if all the indicators are working correctly. Show me how you would check that the direction indicators are working correctly.Ī. Turn on lights (turn ignition on if necessary), walk around the car and check that both the headlights and tail lights are on. Tell me how you would check that the headlights and tail lights are working.Ī. They should not feel spongy and the car should not pull to one side. Tell me how you would check that the brakes are working before starting a journey.Ī. (may need to switch ignition on, prompt not to start engine) (I can assist you, if you need to switch the ignition on, please don't start the engine).Ī.Operate brake pedal, make use of reflections in windows, garage doors, etc, or ask someone to help. Show me how you would check that the brake lights are working on this car. Press the horn and listen (turn on the ignition if necessary). Show me how you would check that the horn is working (off road only).Ī. Identify the reservoir, lift off cap and make a visual check of the level as there are no external markings on the reservoir. Open the bonnet, identify where the Windscreen Washer reservoir is and tell me how you check the level?Ī. Identify the dipstick, pull it out and check the oil level against the min/max markings. Open the bonnet, identify where you would check the engine oil level and tell me how you would check that the engine has enough oil.Ī. Before starting a journey two simple checks can be made.ġ) Gentle pressure on the steering wheel, maintained whilst the engine is started, should result in slight but noticeable movement as the system begins to operate.Ģ) Turning the steering wheel after just moving off will give an immediate indication that the power assisted steering is functioning correctly. If the steering becomes heavy the steering may be faulty. Show me/explain how you would check that the power assisted steering is working before starting a journey.Ī. ![]() Identify the brake fluid reservoir and check the fluid level against the min/max levels. ![]() Open the bonnet, identify where the brake fluid reservoir is and tell me how you would check that you have a safe level of hydraulic brake fluid.Ī. To do this, unscrew the cap and pour in coolant until the max mark is reached. If the coolant is below the min mark then more coolant will need to be added. Identify the coolant tank and check the min/max markings. Open the bonnet, identify where you would check the engine coolant level and tell me how you would check the engine has the correct level.Ī. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |